Shopping Cart

A "BO motor 60 RPM single shaft" is a type of DC gear motor that operates at 60 revolutions per minute (RPM) and has a single output shaft. This type of motor is commonly used in applications requiring controlled rotational speed with a simple output configuration.

Key Features

1. Speed (60 RPM):

   • The motor's speed of 60 RPM is relatively slow, which is suitable for applications that require moderate speed and precision. This speed is typically achieved through a built-in gearbox that reduces the motor's higher base speed.

2. Single Shaft:

   • The motor has a single shaft, which is the primary output shaft used to connect to mechanical components or gears. This setup simplifies the design and integration into various systems.

3. Gearbox:

   • The motor likely includes a gearbox to reduce the speed from a higher RPM to the desired 60 RPM. Gearboxes also provide increased torque.

Typical Applications

1. Robotics:

   • Used for driving wheels or actuators in robots, providing precise control over movement.

2. Conveyor Systems:

   • Suitable for small conveyor belts or feeders requiring moderate speed and torque.

3. Model Trains:

   • Often used in model trains or other scale models where consistent, controlled motion is needed.

4. Automation:

   • Utilized in various automated systems where precise, low-speed operation is required.

Selecting the Motor

When choosing a 60 RPM single-shaft motor, consider the following factors:

1. Voltage Rating:

   • Ensure the motor’s voltage matches your power supply. Common voltages are 6V, 12V, or 24V DC. Check the motor’s datasheet for specific voltage requirements.

2. Torque:

   • Verify the motor’s torque rating to ensure it can handle the load required for your application. Gear motors are designed to provide higher torque at lower speeds.

3. Current Consumption:

   • Check the current rating to ensure your power supply and any controlling electronics can handle the motor’s power requirements.

4. Mounting and Size:

   • Ensure the motor’s physical dimensions and mounting options are suitable for your application.

Example Motor Specifications

Here’s an example of what a typical 60 RPM single-shaft gear motor might look like:

• Voltage: 12V DC
• Speed: 60 RPM (at no load)
• Torque: Varies by model; typically around 1 to 5 kg-cm (depending on the gearbox ratio)
• Current Consumption: Typically 0.5 to 1A (depends on load and voltage)
• Shaft Diameter: Common sizes include 6 mm or 8 mm
• Dimensions: Approximately 50 mm x 30 mm x 30 mm (varies by manufacturer)

Example Motors and Suppliers

If you’re looking for a 60 RPM single-shaft gear motor, you might explore products from:

• Pololu: Offers a range of DC gear motors with different speeds and configurations.
• Adafruit: Provides motors suitable for various hobbyist applications.
• SparkFun: Offers gear motors with different RPMs and features.
• Amazon/Ebay: Search for “60 RPM DC gear motor” to find various options.

Example Wiring and Control

For a typical DC motor:

1. Wiring:

   • Connect the positive terminal of the power supply to the positive terminal of the motor.
   • Connect the negative terminal of the power supply to the negative terminal of the motor.

2. Control:

   • Use a motor driver or controller if you need to control the direction or speed of the motor beyond simple on/off operation.

3. Testing:

   • Power the motor and observe its operation to ensure it runs at the expected speed and direction.

Conclusion

A "BO motor 60 RPM single shaft" is versatile for various low-speed, high-torque applications. Ensure you select a motor with the appropriate voltage, torque, and current specifications for your needs. Whether for robotics, conveyors, or other automated systems, this type of motor offers controlled, reliable performance.