.jpg&width=620&quality=80)
.jpg&width=172&quality=80)
.jpg&width=300&quality=80)
100 RPM BO Motor (Single Shaft) – 6V DC Geared Motor
The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a low-cost geared DC Motor. It is an alternative to metal gear DC motors. The 65MM Wheel is made up of high-quality rubber. The 100 RPM Single Shaft BO Motor is a lightweight, low-cost DC geared motor designed for Arduino-based robotic projects, line followers, and automated systems. Operating at 6V DC, it provides a balance of speed and torque, ideal for compact robot platforms.
₹ 42 ₹99
99
| Voltage : | 12v dc |
| Made In : | India |
Detailed Description:
The 100 RPM Single Shaft BO Motor is a plastic gear motor typically used in robotics and electronics projects. It runs on 3V to 6V DC, delivering 100 RPM at 6V with sufficient torque for lightweight loads like chassis platforms, robotic cars, and spinning mechanisms.
Its compact size, low weight, and easy mounting holes make it suitable for educational kits, school competitions, and rapid prototyping. The single D-shaped shaft allows secure attachment to robot wheels or encoders.
Key Features:
-
Output Speed: 100 RPM @ 6V
-
Single shaft (D-shaped) for easy coupling
-
Compatible with Arduino, Raspberry Pi, ESP32
-
Runs on low voltage: 3V to 6V DC
-
Plastic gearbox for smooth operation
-
Lightweight and compact – ideal for mini robots
-
Easy mounting via pre-drilled holes
-
Energy efficient and cost-effective
Technical Specifications:
| Parameter | Specification |
|---|---|
| Motor Type | BO (Battery Operated) Geared DC Motor |
| Operating Voltage | 3V – 6V DC |
| Output Speed | ~100 RPM @ 6V |
| Shaft Type | Single shaft (D-shape) |
| Shaft Diameter | ~6 mm |
| Shaft Length | ~8–10 mm |
| Gearbox Type | Plastic |
| Stall Torque (Approx.) | ~1.5–2.5 kg·cm @ 6V |
| Current (No Load) | ~100–120 mA |
| Weight | ~30 grams |
How to Use:
-
Connect to a DC power source or motor driver (like L298N or L293D).
-
Use PWM for speed control via microcontroller.
-
Attach compatible wheels or pulleys to the D-shaft.
-
Mount to your robot chassis using screws or clamps.
Recommended: Pair with 100mm wheels, L298N driver, and a castor wheel for a full robot base.
Applications:
-
Line following robots
-
Obstacle-avoiding cars
-
Arduino/ESP32-based smart vehicles
-
Mini conveyor systems
-
DIY Bluetooth/WiFi-controlled cars
-
STEM learning & robotic competitions
-
Rotary motion in embedded projects
Package Includes:
-
1 x BO Motor – 100 RPM, Single Shaft, 6V DC
-
(Wheels, drivers, and chassis sold separately)
0 Reviews For this Product
Related Products
