RJ45 Cat5 0.8m Ethernet Patch LAN Cable with PoE Support
Keep your workbench neat and clutter-free with the RJ45 CAT5 0.8M Ethernet Patch LAN Cable. This compact, high-quality network cable is optimized for short-distance patches, delivering stable data transfer and up to 25W Power over Ethernet (PoE). It is the perfect length for stacking network switches, linking nearby routers, or connecting single-board computers like the Raspberry Pi to your local gateway.
₹ 30
₹ 45
| : |
Add FAQ
Detailed Description
The RJ45 Cat5 0.8m Ethernet Patch LAN Cable with PoE Support is a premium, short-run networking solution designed to handle data bridging and low-voltage power routing within tight structural spaces. Measuring exactly 80 centimeters from end to end, this patch cord prevents the severe airflow blocks and messy wiring bundles caused by using excessively long cables inside cramped server racks and desktop arrays. Built to strict Category 5 guidelines, it features high-integrity twisted wire pairs designed to minimize internal attenuation and preserve clean wave propagation.
A standout feature of this cable is its full compatibility with Power over Ethernet (PoE, PoE+, and PoE++ standards). This allows the inner tinned-copper conductor pairs to carry safe, low-voltage DC power alongside high-speed data packets. This setup completely removes the need to place standalone power adapters or separate electrical lines next to remote devices. Both ends are factory-crimped with high-impact RJ45 connectors featuring corrosion-resistant contacts and molded strain-relief boots that prevent the cable from tearing loose during tight bends.
Key Features and Benefits
-
Full Power over Ethernet (PoE) Support: Carries both DC power and network data on a single cable, simplifying setups for IP cameras, VoIP desk phones, and wireless access points.
-
Optimized Short-Run Footprint: The compact 0.8-meter length is perfect for jumping connections between adjacent switch ports, patch panels, and internal development racks without leaving messy slack.
-
Molded Strain-Relief Boots: Features injection-molded flexible boots over the connector crimp zones to prevent sharp kinks and protect the delicate wire terminations.
-
High-Impact Copper Contacts: Premium internal pins ensure highly accurate data transfers and resist oxidation over long-term deployments in changing climates.
-
Universal Hardware Interfacing: Fully plug-and-play with standard RJ45 ports across all computing systems, including PCs, single-board computers, industrial modems, and hardware shields.
Technical Specifications
| Feature Component | Specification Details |
| Cable Category Standard | Category 5 (Cat5 Optimization Tier) |
| Connector Interface Type | Standard RJ45 Male to RJ45 Male |
| Power-Over-Ethernet Rating | Fully Compatible with PoE (IEEE 802.3af/at/bt standards) |
| Maximum Data Transfer Speed | Up to 100 Mbps / Fast Ethernet Core Capable |
| Conductor Composition Type | High-Purity Tinned Copper Stranded Configuration |
| Wiring Configuration Standard | 4 Twisted Pairs (8 Conductor Channels) |
| Outer Protection Jacket | High-Flexibility Durable PVC Outer Layer |
| Connector Boot Housing | Injection-Molded Strain-Relief Protection Boot |
| Default Cable Distance Length | 0.8 Meters (80 cm approx 2.6 Feet) |
How to Use
-
Unroll and Align: Unpack the 0.8-meter patch cable and check that the RJ45 locking clips on both ends are fully intact and straight.
-
Connect to Power/Data Core: Insert one end of the RJ45 connector into an active port on a PoE network switch, PoE injector block, or internet router. Push it in until it clicks securely into position.
-
Connect to Target Client: Route the remaining end of the short cable directly into your target peripheral device, such as a wall-mounted IP security camera, smart VoIP phone, or an Arduino/Raspberry Pi Ethernet shield.
-
Confirm Link Status: Verify that the link status LEDs on your equipment flash green or amber, indicating a successful connection and active power delivery.
Applications
-
IP Security Camera Arrays: Safely routes power and data to wall-mounted surveillance cameras directly from a central PoE network switch.
-
Network Patch Panels: Ideal for making short, clean jumps between dense patch panels and network switches inside standard 19-inch equipment racks.
-
VoIP Business Desks: Connects desktop IP phones directly to wall network jacks, keeping workspace tabletops completely free of messy power bricks.
-
Microcontroller Cluster Nodes: Connects multiple single-board computers (such as a Raspberry Pi cluster) inside close-quarter development enclosures.
Package Includes
-
1 x RJ45 Cat5 0.8m Ethernet Patch LAN Cable with PoE Support
Shipping & Delivery
-
Free shipping on orders above ₹999 across India
-
Dispatched within 1-3 business days
-
Expected delivery: 3-7 business days depending on location
-
Secure packaging to ensure safe transit of electronic components
0 Reviews For this Product